You are viewing documentation for Kubernetes version: v1.26

Kubernetes v1.26 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date information, see the latest version.

Install and Set Up kubectl on Linux

Before you begin

You must use a kubectl version that is within one minor version difference of your cluster. For example, a v1.26 client can communicate with v1.25, v1.26, and v1.27 control planes. Using the latest compatible version of kubectl helps avoid unforeseen issues.

Install kubectl on Linux

The following methods exist for installing kubectl on Linux:

Install kubectl binary with curl on Linux

  1. Download the latest release with the command:

    curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl"
    
  2. Validate the binary (optional)

    Download the kubectl checksum file:

    curl -LO "https://dl.k8s.io/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl.sha256"
    

    Validate the kubectl binary against the checksum file:

    echo "$(cat kubectl.sha256)  kubectl" | sha256sum --check
    

    If valid, the output is:

    kubectl: OK
    

    If the check fails, sha256 exits with nonzero status and prints output similar to:

    kubectl: FAILED
    sha256sum: WARNING: 1 computed checksum did NOT match
    
  3. Install kubectl

    sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl
    
  4. Test to ensure the version you installed is up-to-date:

    kubectl version --client
    

    Or use this for detailed view of version:

    kubectl version --client --output=yaml    
    

Install using native package management

  1. Update the apt package index and install packages needed to use the Kubernetes apt repository:

    sudo apt-get update
    # apt-transport-https may be a dummy package; if so, you can skip that package
    sudo apt-get install -y apt-transport-https ca-certificates curl
    
  2. Download the public signing key for the Kubernetes package repositories. The same signing key is used for all repositories so you can disregard the version in the URL:

    curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.26/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
    
  3. Add the appropriate Kubernetes apt repository. If you want to use Kubernetes version different than v1.26, replace v1.26 with the desired minor version in the command below:

    # This overwrites any existing configuration in /etc/apt/sources.list.d/kubernetes.list
    echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.26/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list
    
  1. Update apt package index, then install kubectl:

    sudo apt-get update
    sudo apt-get install -y kubectl
    

  1. Add the Kubernetes yum repository. If you want to use Kubernetes version different than v1.26, replace v1.26 with the desired minor version in the command below.

    # This overwrites any existing configuration in /etc/yum.repos.d/kubernetes.repo
    cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
    [kubernetes]
    name=Kubernetes
    baseurl=https://pkgs.k8s.io/core:/stable:/v1.26/rpm/
    enabled=1
    gpgcheck=1
    gpgkey=https://pkgs.k8s.io/core:/stable:/v1.26/rpm/repodata/repomd.xml.key
    EOF
    
  1. Install kubectl using yum:

    sudo yum install -y kubectl
    

Install using other package management

If you are on Ubuntu or another Linux distribution that supports the snap package manager, kubectl is available as a snap application.

snap install kubectl --classic
kubectl version --client

If you are on Linux and using Homebrew package manager, kubectl is available for installation.

brew install kubectl
kubectl version --client

Verify kubectl configuration

In order for kubectl to find and access a Kubernetes cluster, it needs a kubeconfig file, which is created automatically when you create a cluster using kube-up.sh or successfully deploy a Minikube cluster. By default, kubectl configuration is located at ~/.kube/config.

Check that kubectl is properly configured by getting the cluster state:

kubectl cluster-info

If you see a URL response, kubectl is correctly configured to access your cluster.

If you see a message similar to the following, kubectl is not configured correctly or is not able to connect to a Kubernetes cluster.

The connection to the server <server-name:port> was refused - did you specify the right host or port?

For example, if you are intending to run a Kubernetes cluster on your laptop (locally), you will need a tool like Minikube to be installed first and then re-run the commands stated above.

If kubectl cluster-info returns the url response but you can't access your cluster, to check whether it is configured properly, use:

kubectl cluster-info dump

Optional kubectl configurations and plugins

Enable shell autocompletion

kubectl provides autocompletion support for Bash, Zsh, Fish, and PowerShell, which can save you a lot of typing.

Below are the procedures to set up autocompletion for Bash, Fish, and Zsh.

Introduction

The kubectl completion script for Bash can be generated with the command kubectl completion bash. Sourcing the completion script in your shell enables kubectl autocompletion.

However, the completion script depends on bash-completion, which means that you have to install this software first (you can test if you have bash-completion already installed by running type _init_completion).

Install bash-completion

bash-completion is provided by many package managers (see here). You can install it with apt-get install bash-completion or yum install bash-completion, etc.

The above commands create /usr/share/bash-completion/bash_completion, which is the main script of bash-completion. Depending on your package manager, you have to manually source this file in your ~/.bashrc file.

To find out, reload your shell and run type _init_completion. If the command succeeds, you're already set, otherwise add the following to your ~/.bashrc file:

source /usr/share/bash-completion/bash_completion

Reload your shell and verify that bash-completion is correctly installed by typing type _init_completion.

Enable kubectl autocompletion

Bash

You now need to ensure that the kubectl completion script gets sourced in all your shell sessions. There are two ways in which you can do this:


echo 'source <(kubectl completion bash)' >>~/.bashrc


kubectl completion bash | sudo tee /etc/bash_completion.d/kubectl > /dev/null
sudo chmod a+r /etc/bash_completion.d/kubectl

If you have an alias for kubectl, you can extend shell completion to work with that alias:

echo 'alias k=kubectl' >>~/.bashrc
echo 'complete -o default -F __start_kubectl k' >>~/.bashrc

Both approaches are equivalent. After reloading your shell, kubectl autocompletion should be working. To enable bash autocompletion in current session of shell, source the ~/.bashrc file:

source ~/.bashrc

The kubectl completion script for Fish can be generated with the command kubectl completion fish. Sourcing the completion script in your shell enables kubectl autocompletion.

To do so in all your shell sessions, add the following line to your ~/.config/fish/config.fish file:

kubectl completion fish | source

After reloading your shell, kubectl autocompletion should be working.

The kubectl completion script for Zsh can be generated with the command kubectl completion zsh. Sourcing the completion script in your shell enables kubectl autocompletion.

To do so in all your shell sessions, add the following to your ~/.zshrc file:

source <(kubectl completion zsh)

If you have an alias for kubectl, kubectl autocompletion will automatically work with it.

After reloading your shell, kubectl autocompletion should be working.

If you get an error like 2: command not found: compdef, then add the following to the beginning of your ~/.zshrc file:

autoload -Uz compinit
compinit

Install kubectl convert plugin

A plugin for Kubernetes command-line tool kubectl, which allows you to convert manifests between different API versions. This can be particularly helpful to migrate manifests to a non-deprecated api version with newer Kubernetes release. For more info, visit migrate to non deprecated apis

  1. Download the latest release with the command:

    curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl-convert"
    
  2. Validate the binary (optional)

    Download the kubectl-convert checksum file:

    curl -LO "https://dl.k8s.io/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl-convert.sha256"
    

    Validate the kubectl-convert binary against the checksum file:

    echo "$(cat kubectl-convert.sha256) kubectl-convert" | sha256sum --check
    

    If valid, the output is:

    kubectl-convert: OK
    

    If the check fails, sha256 exits with nonzero status and prints output similar to:

    kubectl-convert: FAILED
    sha256sum: WARNING: 1 computed checksum did NOT match
    
  3. Install kubectl-convert

    sudo install -o root -g root -m 0755 kubectl-convert /usr/local/bin/kubectl-convert
    
  4. Verify plugin is successfully installed

    kubectl convert --help
    

    If you do not see an error, it means the plugin is successfully installed.

  5. After installing the plugin, clean up the installation files:

    rm kubectl-convert kubectl-convert.sha256
    

What's next

Last modified October 17, 2023 at 4:20 PM PST: Update docs to use pkgs.k8s.io instead of legacy repos (3ba00978ec)